Ronan X11CA User Manual

X11CA-IM MASTER MODULE (Firmware: X11-MF3 Rev. 3) REVISION : 2.0 DOCUMENT NUMBER : X11CA-3000-IOM DATE : April 21, 2003 EDITOR

Rev 2.0 : X11CA-IM MASTER MODULE 8 Field Name Example (Hex) Slave Address 11 Function 05 Window Address Hi 00 Window Address L AC Force Data Hi

Rev 2.0 : X11CA-IM MASTER MODULE 9 5 LED'S STATUS ? The RUN LED is a green color LED and starts flashing upon applying power to the unit. Wh

Rev 2.0 : X11CA-IM MASTER MODULE 10 6 SETTING THE ALARM MODULE ADDRESSES The X11-CA-IM (Master Module) Scans all the Alarm boards in the chassis co

Rev 2.0 : X11CA-IM MASTER MODULE 11 Alarm Board# SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 35 OFF ON OFF OFF OFF ON OFF OFF 36

Rev 2.0 : X11CA-IM MASTER MODULE 12 Alarm Board# SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 77 OFF OFF ON ON OFF OFF ON OFF 78

Rev 2.0 : X11CA-IM MASTER MODULE 13 Alarm Board# SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 119 OFF ON ON OFF ON ON ON OFF 120

Rev 2.0 : X11CA-IM MASTER MODULE 14 Alarm Board# SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 161 OFF OFF OFF OFF OFF ON OFF ON 16

Rev 2.0 : X11CA-IM MASTER MODULE 15 7 PRGM/RUN SWITCH Use the PRGM/RUN switch on the X11CA-IM to set the mode to either program mode or run mode.

Rev 2.0 : X11CA-IM MASTER MODULE 16 Button Name Full Name Description TEST Test Tests properties of alarm modules. SIL Silence Stops the sound o

Rev 2.0 : X11CA-IM MASTER MODULE 17 8 APPENDIX A: LIST OF TABLES TABLE 2-1 DESCRIPTIONS OF MODBUS COMMUNICATION DATA FORMAT...

Rev 2.0 : X11CA-IM MASTER MODULE i 1 OVERVIEW...

Rev 2.0 : X11CA-IM MASTER MODULE 18 9 APPENDIX B: LIST OF FIGURES FIGURE 1-1 X11CA-IM...

Rev 2.0 : X11CA-IM MASTER MODULE 1 1 OVERVIEW The X11CA-IM Interface Module monitors alarm module activities. It also provides special features, su

Rev 2.0 : X11CA-IM MASTER MODULE 2 Revision 2.0 ECO11939 FIRMWARE was upgraded to Version 3 Added MODBUS function 3& 5 1.3 Reference Document

Rev 2.0 : X11CA-IM MASTER MODULE 3 2 X11-MF3 FIRMWARE The firmware on the X11CA-IM scans each X11CA alarm module for the following information. Fi

Rev 2.0 : X11CA-IM MASTER MODULE 4 3 CABLES The Port 2 is communication port to host device and can be either RS232 or isolated RS485. ? The RS48

Rev 2.0 : X11CA-IM MASTER MODULE 5 4 MODBUS COMMUNICATION PROTOCOL 4.1 Slave Address Setting The Slave Address switch (SW1 or SW3, depending on t

Rev 2.0 : X11CA-IM MASTER MODULE 6 EXAMPLE: The following example reads registers 40108-40110 from the slave device 17. 11HEX = 10001 BIN =1

Rev 2.0 : X11CA-IM MASTER MODULE 7 4.4 Modbus RTU Protocol Function 5: Force Single Cells To send alarms to X11CA-IM serially, use Modbus RTU Pro